Mercedes-Benz 2008 CLS 550, Operator'S Manual

Page: 140 / 481

139
Controls in detail
Control system
왔
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position
1 or as soon as the
KEYLESS-GO start/stop button* is in
position
1 . The control system enables you
to:
앫
call up information about your vehicle
앫
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the multifunction display, and
much more.
The control system relays information to
the multifunction display.
Multifunction display
1
Outside temperature
2
Trip odometer
3
Automatic transmission program mode
4
Main odometer
5
Current gear selector lever position
Above illustration shows the standard
display.
For more information on menus displayed
in the multifunction display, see “Menus”
(
컄
page 142).
i
The displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.