Mercedes-Benz 2007 SL 550, Operator'S Manual

Page: 160 / 473

159
Controls in detail
Control system
Lighting submenu
Access the Lighting submenu via the
Settings menu. Use the Lighting sub-
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Setting daytime running lamp mode
(USA only)
왘
Move the selection marker with button
æ
or
ç
to the Lighting sub-
menu.
왘
Press button
j
or
k
repeatedly
until the message Light circuit
Headlamp mode appears in the multi-
function display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
manual operation ( Manual ) or daytime
running lamp mode ( Constant ).
With daytime running lamp mode activated
and the exterior lamp switch at
position
M
or
U
the low beam head-
lamps are switched on when the engine is
running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
Function Page
Setting daytime running lamp
mode (USA only) 159
Setting locator lighting 160
Setting night security illumina-
tion 160
Setting interior lighting delayed
switch-off 161
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
i
For safety reasons, resetting to factory set-
tings (
컄
page 153) while driving will not deacti-
vate the daytime running lamp mode.
The following message appears in the multifunc-
tion display:
Cannot be fully reset to
factory settings when driving
.