Mercedes-Benz 2007 CLS 550, Operator'S Manual

Page: 129 / 481

128
Controls in detail
Lighting
For information on how to switch on the
headlamps and use the turn signals, see
“Switching on headlamps” (
컄
page 55)
and see “Turn signals” (
컄
page 55).
Exterior lamp switch
Exterior lamp switch
i
If you drive in countries where vehicles drive
on the other side of the road than the country
where the vehicle is registered, you must have
the headlamps modified for symmetrical low
beams. Relevant information can be obtained at
your authorized Mercedes-Benz Center.
i
Vehicles equipped with active Bi-Xenon*
headlamps: The active Bi-Xenon headlamps
monitor your steering angle and driving speed,
then automatically shift their beams to either
side to better follow the curvature of the road
ahead, increasing usable illumination over con-
ventional headlamps.
1
‚
Standing lamps, left (turn left two
stops)
2
ˆ
Standing lamps, right (turn left
one stop)
3
M
Off
Daytime running lamp mode
(
컄
page 130)
4
U
Automatic headlamp mode
Daytime running lamp mode
(
컄
page 130)
5
C
Parking lamps (also side marker
lamps, tail lamps, license plate
lamps, instrument panel lamps)
6
B
Low beam headlamps or high
beam headlamps when the com-
bination switch is pushed for-
ward. The tail lamps, license
plate lamps, side marker lamps,
parking lamps and instrument
panel lamps also come on.
7
‡
Front fog lamps
8
†
Rear fog lamp
i
If you hear a warning signal you have forgot-
ten to switch off the headlamps before opening
the driver’s door.
In addition the message
Switch off lights
appears in the multifunction display.
Switch off the headlamps.