Mercedes-Benz 2004 CL 500, Operator'S Manual

Page: 264 / 418

263
Operation
Engine compartment
Other display messages
If the SmartKey or KEYLESS-GO start/stop
button* is not in position
2 , the following
message will appear:
FOR ENGINE OIL LEVEL
IGNITION ON!
왘
Switch on ignition.
If you see the message:
PERF. SERV ON TIME
왘
If engine is at normal operating
temperature, wait five minutes before
repeating check procedure.
왘
If engine is not yet at normal operating
temperature, wait 30 minutes before
repeating check procedure.
If you see the message:
ENGINE OIL LEVEL
NOT WHEN ENGINE ON!
왘
Turn off the engine.
왘
If the engine is at normal operating
temperature, wait five minutes before
checking oil.
왘
If the engine is not yet at normal oper-
ating temperature, you must wait
30 minutes before checking oil.
If there is excess engine oil with the engine
at normal operating temperature, the fol-
lowing message will appear:
ENGINE OIL LEVEL
REDUCE OIL LEVEL
왘
Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Center.
For more information on messages in the
display concerning engine oil, see the
“Practical hints” section (
컄
page 310).
!
Excess oil must be siphoned or drained
off. It could cause damage to the en-
gine and catalytic converter not cov-
ered by the Mercedes-Benz Limited
Warranty.
i
Perform the engine oil level check with
the dipstick (CL 500, and CL 55 AMG
only) if it cannot be completed with the
control system .
In this case we recommend that you
have the system checked at a
Mercedes-Benz Center.