Mercedes-Benz 2003 CL 500, Operator'S Manual

Page: 146 / 384

146
Controls in detail
Automatic transmission
Gear selector lever position
Effect
P Park position
Selector position when the vehicle
is parked. Only place selector lever
in position
P when vehicle is
stopped. The park position is not in-
tended to serve as a brake when
the vehicle is parked. Rather, the
driver should always set the park-
ing brake in addition to placing the
selector lever in position
P to se-
cure the vehicle.
The key can only be removed from
the starter switch with the selector
lever in position
P . With the key re-
moved the selector lever is locked
in position
P .
Effect
R Reverse gear
Place selector lever in position R only
when vehicle is stopped.
N Neutral
No power is transmitted from the en-
gine to the drive axle. When the
brakes are released, the vehicle can
be moved freely (pushed or towed).
To avoid damage to the transmission,
never engage
N while driving.
If the ESP is deactivated or malfunc-
tioning:
Only move selector lever to
N if the
vehicle is in danger of skidding (e.g.
on icy roads).
D Drive
The transmission shifts automatical-
ly. All five forward gears are avail-
able.
!
Coasting the vehicle, or driving for any
other reason with selector lever in
N
can result in transmission damage that
is not covered by the Mercedes-Benz
Limited Warranty.
Warning!
G
Getting out of your vehicle with the selector
lever not fully engaged in position
P is dan-
gerous. Also, position P alone is not intend-
ed to or capable of preventing your vehicle
from moving, possibly hitting people or ob-
jects.
Always set the parking brake in addition to
shifting to position
P (
컄
page 44).
When parked on an incline, turn the front
wheels towards the road curb.