Mercedes-Benz 2003 CL 500, Operator'S Manual

Page: 111 / 384

111
Controls in detail
Lighting
Combination switch
The combination switch is located on the
left side of the steering column.
1 High beam
2 High beam flasher
Switching on high beams
왘
Turn exterior lamp switch to
position
B
(
컄
page 108).
왘
Push the combination switch in
direction
1 .
The high beam symbol
A
is illumi-
nated on the instrument cluster.
High beam flasher
왘
Pull the combination switch briefly in
direction
2 .
Hazard warning flasher
The hazard warning flasher can be activat-
ed with the ignition switched on or off. It is
activated automatically when an airbag is
deployed.
The switch is located on the center con-
sole.
1 Hazard warning flasher switch
Switching on the hazard warning
flasher
왘
Press the hazard warning flasher
switch.
All turn signals will blink.
Switching off the hazard warning
flasher
왘
Press hazard warning flasher switch
again.
i
With the hazard warning flasher acti-
vated and the combination switch set
for either left or right turn, only the re-
spective left or right turn signal will op-
erate when the key in the starter switch
is in position
1 or 2 .
i
If the hazard warning flasher was acti-
vated automatically, press switch
1
twice.