Mercedes-Benz 2003 C-Class Wagon, Operator'S Manual

Page: 325 / 370

331
Technical data
Fuels, coolants, lubricants etc.
Premium unleaded gasoline Fuel requirements
Use only Premium unleaded meeting
ASTM standard D 439:
앫
The octane number (posted at the
pump) must be 91 min. It is an average
of both the Research (R) octane num-
ber and the Motor (M) octane number:
(R+M)/2). This is also known as the
ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as Ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not exceed
10%; MTBE not to exceed 15%.
The ratio of Methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of Ethanol and Methanol is
not allowed. Gasohol, which contains 10%
Ethanol and 90% unleaded gasoline, can be
used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure etc.
!
To maintain the engine’s durability and
performance, premium unleaded gaso-
line must be used. If premium unleaded
is not available and low octane fuel is
used, follow these precautions:
앫
Have the fuel tank only partially
filled with unleaded regular and fill
up with premium unleaded as soon
as possible.
앫
Avoid full throttle driving and abrupt
acceleration.
앫
Do not exceed an engine speed of
3000 rpm if the vehicle is loaded
with a light load such as two per-
sons and no luggage.
앫
Do not exceed
2
/
3
of maximum ac-
celerator pedal position if the vehi-
cle is fully loaded or operating in
mountainous terrain.
i
MY 2003 Mercedes-Benz C 320 mod-
els, except those equipped with manu-
al transmission or 4MATIC*, are
Flexible Fuel Vehicles.
These vehicles are designed to operate
on premium unleaded gasoline or Etha-
nol fuel (E85), or on any mixture of
these two.
See notes on Flexible Fuel Vehicles
(
컄
page 332).
S203 MY03_A.book Page 331 Tuesday, January 28, 2003 2:22 PM