Mercedes-Benz 2001 S 600, Operator'S Manual

Page: 130 / 157

130
Rear Bench Seat Cushion
Removal: Push in locking tabs (1) (on
left and right side of seat) and pull up
seat at the front.
Installation: Slide rear edge of cushion
under the backrest. Push front of
cushion down until it locks in place.
Caution!
Watch out for sharp edges when
removing or installing the rear seat
cushion, and make sure that it is
securely locked in place again, to
prevent personal injury.
Emergency Operation of
Sliding/Pop-Up Roof
The sliding roof can be opened or
closed manually should an electrical
malfunction occur.
Assemble the lug wrench and extension
(from tool kit). Insert extension
through opening in panel and place on
the hex-drive of the electric motor.
Turn lug wrench (manually) to open or
close roof as desired.
To slide the roof closed or to raise the
roof at the rear: turn clockwise.
To slide the roof open or to lower the
roof at the rear: turn counterclockwise.