Mercedes-Benz 2001 C 320, Operator'S Manual

Page: 319 / 474

318
Operation
Tires and wheels
DOT, Tire Identification Number (TIN)
U.S. tire regulations require each new tire
manufacturer or tire retreader to mold a
TIN into or onto a sidewall of each tire
produced.
The TIN is a unique identifier which facili-
tates efforts by tire manufactures to notify
purchasers in recall situations or other
safety matters concerning tires and gives
purchasers the means to easily identify
such tires.
The TIN is comprised of “Manufacturer’s
identification mark”, “Tire size”, “Tire type
code” and “Date of manufacture”.
1
DOT
2
Manufacturer’s identification mark
3
Tire size
4
Tire type code (at the option of the tire
manufacturer)
5
Date of manufacture
DOT (Department of Transportation)
A tire branding symbol
1
(
컄
page 318)
which denotes the tire meets require-
ments of the U.S. Department of Transpor-
tation.
Manufacturer’s identification mark
The manufacturer’s identification mark
2
(
컄
page 318) denotes the tire
manufacturer.
New tires have a mark with two symbols.
Retreaded tires have a mark with four sym-
bols. For more information on retreaded
tires, see (
컄
page 300).
Tire size
The code
3
(
컄
page 318) indicates the
tire size.
i
For illustration purposes only. Actual
data on tires is specific to each vehicle
and may vary from data shown in above
illustration.