Controls
>
Combination Switch
1
Low beam (lighting switch
turned clockw ise to 2nd notch)
2 High beam (lighting switch
turned clockw ise to 2nd notch)
3 Headlamp flasher (high beam
available independent of lighting
switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move
the com bination switch past the
point of resistance (up or down).
The sw itch is autom atically can
celled when the steering wheel is
turned by a large enough angle.
To signal minor directional changes
of the vehicle, such as changing
lanes on a highway, move com bina
tion switch to the point of resis
tance only and hold it there.
6 Control for w indshield washer
system
When the washer system is
switched on, the wipers also
operate
7 Windshield w iper control
0 Windshield w iper switched off
1 Intermittent wiping
II Normal wiper speed
III High wiper speed
Hints:
If one of the turn signals fails, the
turn signal indicator system flashes
and sounds at a faster sequence
than under normal operating condi
tions.
Fog lamps will only operate to
gether with low beam headlamps.
Fog lamps are turned off automati
cally when lighting switch is
returned to off-position.
20
Summary of Contents for 1982 380 SL
