![MERCATOR BH151ESWSL Installation And Operation Instruction Book Download Page 13](http://html1.mh-extra.com/html/mercator/bh151eswsl/bh151eswsl_installation-and-operation-instruction-book_1771488013.webp)
WIRING DIAGRAM
11
Rev 2.0
Mercator Pty Ltd. All Rights Reserved.
WIRING DIAGRAM
ALL POLE DISCONNECTION FROM THE SUPPLY MAINS MUST BE INCORPORATED IN THE FIXED
WIRING IN ACCORDANCE WITH AS/NZS 3000 IN ADDITION TO WALL CONTROLLER SUPPLIED
WALL CONTROLLER INSTALLATION INSTRUCTION
Do not mount wall controller near heat producing equipment.
The wall controller provided is designed to be connected with the product supplied in this package
only. Other uses may cause personal injury or fire hazard.
Make sure electricity is turned off at the main power box before commencing work. Turn off the
power by removing fuse or turning off circuit breaker before installing the wall controller.
HOW TO INSTALL WALL CONTROLLER
1.
Disconnect the power and remove the existing wall plate and switch (if any).
2.
Tighten screws on the terminal blocks and make sure wire connections are secure.
3.
Secure the wall controller to the wall with two screws provided.