6
Router Mode Setup
1.
Plug the extender into a wall socket outlet and switch on the wall
socket.
2.
Slide the mode selector switch to ‘Router’ and the power switch
to ‘ON’.
3.
Connect to the WiFi network called ‘Wireless-N’.
5.
Select ‘Wizard’ to navigate to the setup page.
6.
Select the host WiFi (existing WiFi router) from the WiFi list, then type
in the host WiFi password. Here you can also create a new network
name for extended network by changing the default SSID.
7.
Press ‘Connect’ to begin the setup process. After loading, the device
will restart and the extended network will be ready to use.
8.
To connect a device to the WiFi network, open your device’s network
settings and connect to the network you have set up.
If using the WPS Quick Connect Button:
1.
Plug the extender into a wall socket outlet and switch on the wall
socket.
2.
Slide the mode selector switch to ‘Repeater’ and the power switch to
‘ON’.
3.
Press and hold the WPS button on the extender for 6 seconds, then
press the WPS button on the host WiFi router for 2 seconds.
Note: press the WPS button on the host WiFi router within 2 minutes of
pressing the WPS button on the extender.
The device will restart, which might take a few minutes. After the device
has restarted, the extended WiFi network will be ready to use.
WPS
Button
