20-08324-UK
-02
3
EXPECTED SERVICE LIFE
The expected service life of the Product is ten years when used in accordance with the instructions in this manual.
The Product's date of manufacture can be found together with the serial number on one of the silver labels on the
Product's chassis, marked with Lev/Del and stated in the format YYWW (number of year and week).
As a user of the Product, you should contact your prescriber, technical aids centre or distributor if the Product
shows reduced or altered performance.
After the expected service life, it is important to make an overall assessment of the Product before continuing
to use it. After the expected service life, Mercado Medic AB cannot guarantee the suitability and safety of the
product, as Mercado Medic AB has no control over how the product has been used and wear and tear. The overall
assessment of the Product should be carried out by the healthcare organisation if the product is prescribed,
and, as a minimum, should take into account how the Product has been used, the condition of the Product and
its component parts, whether the Product has been reconditioned and been serviced, when this occurred, what
actions have been taken on these occasions and the reason for the actions.
In markets outside Sweden and Norway where a distributor has sold the Product directly to the user (where
applicable), and therefore there is no responsible prescriber, periodic maintenance must be carried out according
to instructions in the section Reconditioning and Service in addition to the overall assessment above.
After the expected service life, Mercado Medic AB cannot guarantee the provision of spare parts. CE marking is
not affected by expected service life.
CLEANING AND CARE
The chair should be wiped down and kept free from
dust and dirt.
Upholstery should be washed using a foam wash:
1. Remove loose dirt, crumbs and the like.
2. Apply a thin layer of foam and rub the foam in
evenly with a damp cloth.
3. Wipe with a clean and lightly dampened cloth.
4. Vacuum well once everything has dried.
For functional reasons, seats, backrests and other
padded parts are not made from impermeable
materials. Padded parts should be replaced during
reconditioning for hygienic reasons. The lifting
mechanism must be checked regularly for dust, dirt
and stability: raise the seat to its highest position.
Clean with a cloth. Do not use any water or solvents.
Then lubricate the cylinder using a thin layer of
Teflon or silicone-based grease.
Combustible:
• Seat
• Backrest
• Armrest
• Neck support
• Other padded parts sold by Mercado Medic AB
Electronic waste:
• Motors
• Cables
• Control system
INSTRUCTIONS FOR DESTRUCTION
Metal:
• Base
• Electric lifting mechanism
• Gas pistons
• Gas springs
• Seat frame
• Backrest mechanism
• U-bars and armrest mechanism
• Other metal parts in products sold by Mercado Medic AB
NOTE! Battery has to be sorted separately.
Summary of Contents for REAL 2000 Series
Page 7: ...20 08324 UK 02 7...
