4
Remote Control IR 24V 1G
Assembly and pairing
21-08545_en-00
3. Assembly and pairing
3.1. Assembly of IR receiver
The receiver is connected to the connection on the control box's manual controller. For more information about
the control box, download the
Connection Guide 24V1G
document from our website.
3.2. Pairing
1. Make sure the chair is charged or connected
to a charger (please note that the chair cannot
be driven with the charger connected)
2. Pull out and replace the IR receiver in the control box
to activate pairing mode
3. Within 30 seconds of connecting the receiver,
depress both buttons for adjusting the height function
simultaneously as shown on the right and keep them
depressed for about 2 seconds
4. The chair and remote control are now paired
5. Verify that pairing has been completed by test running
one function e.g. seat height (please note that the chair
cannot be operated with the charger connected)
4. Use
The remote control only works with the chair
to which it is paired.
Two versions of the remote control are available.
One with the possibility of adjusting seat height,
seat tilt, back angle and brake (805169) and the
other with only seat height adjustment (805170).
1. Seat height adjustment
2. Seat tilt adjustment
3. Adjustment of back angle
4. Activation and deactivation of brake
2
1
1
3
4
805169
805170
