Remote control battery operation
Installation Order Diagram
1.Front axle and front spring assembly
How to adjust R/C frequency:Long press forward and backward button for 3 seconds, and the speed
indicator flashes.Then turn on the power, the speed indicator goes to long bright, means the
connection successfully. If the speed indicator no response, means the connection failed. Replace the
batteries and retry.
•
Take off the battery cover. Put two AAA1.5V remote control battery in with right polarity.
•
New and used batteries can not be used mixed.
•
Do not insert batteries into wrong polarity, or will be short-circuited.
•
Non-rechargeable batteries can not be recharged. Exhausted batteries should be replaced by adults.
•
The exhausted battery must be handled and operated properly by adults only. Do not be played by
children.
First, put the flat iron on the front axle. Put 1pcs front spring to each side of square tube. Then insert the
front axle into the hole of square tube, add 1pcs washer and use spanner to tighten the nut. The same
way for the other side. Direction lever should be passed through the hole of front axle, then add 1pcs
washer and use spanner to thighten
the nut.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
