EN
IMPORTANT SAFETY INFORMATION
Please note the following safety precautions before exercising
1.
Read all instructions before assembly & operation
2.
Check all screws, nuts & other connections before using the bike
3.
Do not expose the equipment to damp places, which will cause failure
4.
When assembling, it is best to place parts on a mat (rubber or wood) to avoid soiling
5.
Before exercise, make sure that no other items are placed within 2 meters around the
equipment
6.
Clean only with a damp cloth, do not use solvent cleaners and also note after each
exercise should be wiped off the sweat on the equipment
7.
Incorrect or excessive exercise can damage your health. It is recommended to consult
a doctor before exercising. He will give you a maximum amount of training (including
pulse, watts, duration, etc.) so that you can Exercise and get accurate information. Note:
This equipment is not suitable for therapeutic use
8.
only when the machine is in normal conditions to exercise, maintenance can only use
the original accessories provide by the factory
9.
This machine can only be used by one person at a time
10.
Always wear sport clothes and sports shoes when exercising, especially the sports
shoes must fit
11.
If at any time during exercise you feel faint, dizzy or experience pain, stop and consult
your physician
Children and disabled persons can only use when they are under guardianship
The design of this car can adjust the size of the resistance to adjust the motion intensity,
and can be adjusted back and forth between light and heavy to select your suitable
resistance.
The maximum weight capacity of this unit is 1
2
0 kilograms.
This equipment is designed for indoor use only!
12.
13.
14.
15.
Attention:
Make sure all screws and nuts are tightened before Exercise
Tip:
The front-end cap can be moved; it allows you to move the bike.
33
Summary of Contents for MS199768
