3
•
Always use safety equipment – safety goggles, mask, safety
shoes, and ear protectors.
•
Do not overload the machine. Use the adequate tool for
type of drilling to be conducted ,guaranteeing the good
quality of the work and the safety in the operation.
•
Do not change tools with the drilling machine turned on.
Always turn machine off and unplug it for your own safety.
Use:
•
This machine is specially designed for perforation of light
steel. It cannot be used for other purposes under any
circumstance. Equipment must not be modified.
Assembly of the CTYP-60 Drill and tools change:
Before using your magnetic drill, you need to install the tools.
Quando utilizar as Fresas Anulares, o Pino Piloto deve ser o 1º
item a ser inserido na CTYP-60. The pilot pin must be the first
item to be installed in the CTYP-100. After that, slide the
annular cutter into an adapter. After your hear a "click"
sound, it means that it is locked. Use a hex wrench text to
fasten it, making sure it is securely locked
Warning: make sure the lock is in the annular cutter and not
on the shaft.
To remove the cutting tool (annular cutter), perform
backwards procedure.
Check if the magnet base is on and accordingly fixed, pushing
the Pilot Pin. If the rotation is too weak or too strong, adjust
the rotation of the drill.
