Meraki MX67C, Installation Manuals, Page: 3 / 9

Function LED Status Meaning
Power Up/Boot Solid Orange Power is applied
Connecting Rainbow Device in process of connecting to the Meraki Dashboard
Connected Solid White Fully operational
Upgrading Flashing
White During boot or no WAN link
LTE Enabled Purple LTE is on and connected
The MX67C back panel
Additional functions on the back panel are described below, from left to right.
LAN ports Ten (Ports 3 through 12) provide connectivity to computers, printers, access points, or
Ethernet switches. Two of these ten (Ports 11 and 12) also provide PoE+ (802.3at) support.
Two LEDs -- one for activity, another for connectivity. A steady green LED indicates
bidirectional connectivity while a flashing green LED indicates traffic.
Internet ports Two ports provide connectivity to the WAN.
Power input Designed for use only with the unit’s power supply.
Antenna ports Two RP-SMA ports for dipole antennas (two antennas included)
The MX67C side panel
Restore button Insert a paper clip if a reset is required.

A brief, momentary press: To delete a downloaded configuration and reboot.

Press and hold for more than 10 sec: To force the unit into a full factory reset.