Wireless LAN Extension
8 of 9
3
Configuring your Point-to-Point link in the Dashboard
The two MR58 units forming the point-to-point link must be in the same
logical network as the rest of your Meraki equipment. In addition, there
are two configuration settings in the Meraki Dashboard that must be
applied in order for the wireless link to function properly:
1) Under
Configure -> Access control
–> Addressing and Traffic
, the
Bridge Mode
radio button should be selected. This will instruct the
Meraki network to operate as a wireless extension of your LAN and
rely on the LAN configuration for all network connectivity
2) Under
Configure -> Network-wide settings -> Device Configuration
select
Clients wired directly t
o Meraki AP’s behave like they are
connected to [SSID name]
. This ensures that your point-to-point
traffic inherits the settings for the appropriate SSID.