MEP SHARK 282, Use And Maintenance Manual

Page: 12 / 152

MEP S.p.A.
1--4 4
Use and maintenance manual SHARK 282
SPINDLE MOTOR
No.of poles Current (Volts) Absorption
(Amps)
Power (Kw) rpm Band saw
speed
2/4 400 5,6/4 1,8/1,5 2.860/1400 72/36 mt/min
4/8 optional 400 3,1/2,7 1,1/0,55 680/1330 36/18 mt/min
Stator wound with enamelled copper wire, class H 200° C.
Class F insulation (limit temperature TL 155° C).
IP 55 protection rating (total against contact with live parts, water sprayed from all directions, with shaft oil
seal).
Conforming to CEI norms, publication: IEC 34 of 01/07/1985.
Example of class F insulation: in air--cooled machines at an ambient
temperature of 40 ° C (according to CEI 2--3 and IEC 85), the allowable
overtemperature is 100 ° C (where ٛ 100 C represents the allowable DT).
The machine is supplied with a 2/4 pole three phase motor giving 2 band saw
speeds:
-- 1ª speed (4 poles) = 36 mt/min
--- 2ª speed (2 poles)= 72 mt/min;
The OPTIONAL 4/8 pole motor gives speeds of 36/18 mt./min.
ELECTROPUMP MOTOR
Single phase; Frequency 50 Hz.
Voltage (Volts) Absorption
(Amps)
Power (Kw) rpm Delivery rate
lt/min
Head (mt.)
230 0,40 0,06 2800 11 1,5
400 0,20 0,06 2800 11 1,5
Protection rating IP 55.
Conforming to CEI norms, publication: IEC 34 of 01/07/1985.
CUTTING CAPACITY
Section
0° 250 220 280 x 220
45°
a
230 200 220 x 200
60°
a
120 80 140 x 80
45°
'
200 170 200 x 140
N.B.
Warning