JUNGLE GYM CAT TREE CONDO INSTRUCTIONS
NOTE
: 2-person assembly required. It is suggested that you have a Building Buddy to help you assemble this tree (and maybe a glass of wine).
And no matter what your Building Buddy says, yes, you do need the instructions. If you’re more of a visual person, check out our instructional
video at
https://www.meowingtons.com/pages/help
PARTS LIST
A1
A2
B1
B2
K
M
N
P
B3
C
D
E
Q
F
G
H
J
–
Base Platform
–
Playpen Platform
–
Playpen Side Panel
–
Playpen Side Panel
–
Support Bracket (x1)
–
Hammock (x1)
–
Sisal Scratch Pad (1)
–
Felt Platform Pads (x3)
–
Playpen Back Panel
–
Playpen Bars (x6)
–
Curved Panel
–
Top Platform
–
Faux Fur Cushion (x1)
–
Scratching Pole (x1)
–
Support Beam (x1)
–
Hammock Platform (x1)
–
Support Brackets (x2)
On Base Platform (A1), Insert
Wooden Dowels (Rx4) into
innermost center holes. Then, taking
Playpen Side Panel (B1), insert
Barrel Nuts (Wx2) into bottom side
holes of the Side Panel (B1). Align
Barrel Nuts (W) so the holes align
with the Base Platform (A1). TIP:
Use Cross-Head screwdriver to hold
the Barrel Nut in place or to rotate
and realign Barrel Nut if necessary.
Attach Playpen Side Panel (B1) onto
LEFT side of Base Platform (A1) by
lining up Dowels (R) with the holes
and attach with S Bolts.
Repeat Step 2 to attach Playpen
Side Panel (B2) onto Base Platform
(A1) on the opposite side parallel
to Side Panel (B1).
Insert Wooden Dowels (Rx4) into top
and bottom holes of Playpen Back
Panel (B3), and attach to Base Platform
(A1) by lining up Wooden Dowels (R)
with the holes on both
Parts.
Insert Playpen Bars (C) into
indicated holes in Base Platform
(A1). Finish tightening Bolts on top
of Playpen Platform (A2).
Insert Barrel Nuts (Wx4) into TOP
outer side holes of both Playpen
Side Panel (B1) and Playpen Side
Panel (B2). Insert Wooden Dowels
(Rx4) into top of Playpen Side Panel
(B1) and Playpen Side Panel (B2).
Taking Playpen Platform (A2), Align
holes with the Wooden Dowels (R)
in Playpen Side Panel (B1) and
(B2) and Playpen Back Panel (B3)
and gently press down. Insert S
Bolts (x4) through top of Playpen
Platform (A2) into Playpen Side
Panel (B1) and Playpen Side Panel
(B2). Lightly tighten bolts using
Allen Wrench (Y) while keeping
Barrel Nuts (W) aligned using
Cross-Head screwdriver.
DO NOT
FULLY TIGHTEN BOLTS.
Stand Curved Panel (D) upright
with Circular Opening positioned
at top; Attach Curved Panel (D) to
Side Panel (B1) with V Bolts (x4)
by aligning the holes on both parts.
Attach Scratching Pole (F) to top of
Playpen Platform (A2) with U Bolt
(x1) by aligning holes and screwing
on the Pole with a clockwise
twisting motion.
Insert Hammock Platform (H) into
the horizontal slot in Curved Panel
(D), and push all the way through.
Attach the inserted end of Hammock
Platform (H) to top of Scratching
Pole (F) using U Bolt (x1) and
tighten with Larger Allen Wrench (Z).
Attach bottom of Support Beam
(G) to Playpen Platform (A2) with
S Bolt (x1). Attach top of Support
Beam (G) to top of Curved Panel
(D) with V Bolt (x1).
STEP 1
STEP 2
STEP 3
STEP 6
STEP 4
STEP 5
STEP 7
STEP 8
STEP 10
STEP 9
R
–
12 PCS
S
–
18 PCS
T
–
4 PCS
U
–
2 PCS
V
–
5 PCS
W
–
8 PCS
X
–
4 PCS
Y
–
1 PCS
Z
–
1 PCS
1
–
1 PCS
Wooden Dowels
6*35 mm
6*16 mm
10*35 mm
6*30 mm
Barrel Nut
Cap Nut
Allen Wrench Larger Allen Wrench Wall Anchor Strap
3
–
1PCS
2
–
1PCS
4
–
1PCS
Anchor Bolt
Washer
Screw Anchor
