Multitest plus
Operator's manual
- 8 -
Introduction
Constantly increasing demands with regard to the performance and operational safety of
respiratory protective equipment call for a sustained effort to continually optimize equipment
testers.
Combining pinpoint accuracy with utmost operator friendliness and a stylish design, the Menzl
“Multitest plus” tester meets all the requirements of state-of-the-art equipment testing.
The tester
The “Multitest plus” tester is suitable for testing respiratory protective masks, lung-governed
demand valves and pressure reducers at low pressure and medium pressure. In its basic
configuration, it can be used for performing tests on pieces of equipment with round-thread
connectors and euro couplings. Thanks to a wide range of adapters (see
), it is
also possible to test equipment with other types of connectors as well as different makes of
chemical protective suits.
Features of the tester
One battery (type D cell) is required for operating the tester. A compressed-air supply is not
needed. Optionally, the tester can be powered via a 230V/1.5V mains adapter. The low
pressure for leak-tightness tests and functional tests is provided by the tester's built-in pump
and shown on the low-pressure gauge. The static SCBA medium pressure is supplied to the
tester by means of the medium-pressure connector and shown on the medium-pressure
gauge. Chemical protective suits get inflated via the filling hose's push-button valve, which
features a plug-in nipple that is compatible with the plug-in safety coupling. The dummy head
can be inflated with compressed air from either an SCBA or a compressed-air supply line.
Scope of possible tests
- all leak-tightness tests, opening-pressure tests and closing-pressure tests
- all tests performed at low pressure or medium pressure
- all tests done with a suction pump or a pressure pump
