EN
22
CLEANING
1�
Turn the raw juice extractor off, pull the plug out of the wall socket and wait
until the shredding filter has stopped spinning�
2�
Remove the dirty parts from the motor unit in the following order:
– Depress the locking lever�
– Remove the pulp container�
– Remove the feed tube pusher�
– Remove the transparent cover�
– Remove the shredding filter
MAINTENANCE
CAUTION
• Plastic can be discoloured by brightly-coloured fruit and vegetables� To prevent this,
rinse the parts immediately after use�
• Do not use abrasive cleaning agents, scourers, acetone, alcohol, etc� to clean the raw
juice extractor�
• Wash every part (except the motor unit) with a mild detergent and wipe dry with a soft cloth�
• Do not use strong, abrasive or corrosive cleaning agents� These will damage the raw juice
extractor’s components�
• The blades are extremely sharp� Be careful when washing the shredding filter even when
using a dish brush�
• Wait until all parts are properly dry� Then store them in a clean and dry place�
2
1
Clean these parts with water�
Wipe the motor unit with
a dry cloth� Never immerse
the motor unit in water or
rinse it under the tap�
