EN
24
• The product must only be
connected to a correctly
earthed power point. The
plug must be easily accessi-
ble so that it can easily be
pulled out in an emergency.
Check that the rated voltage
for the product corresponds
to the mains supply voltage.
If an extension cord is used
the cross-sectional area of
the wires must be dimen-
sioned for the power supply
to the product.
• Place the power cord so that
it cannot be walked on or
clenched, and so that it
cannot come into contact
with hot surfaces.
• Pull out the power cord
– Before fitting/removing
inserts.
– If the product is not going
to be used for some time.
– If there is a risk of a
thunderstorm.
– Before cleaning.
• Do not pull the power cord to
pull out the plug.
• Never immerse the product
in water or any other liquid.
Do not expose the product,
• Handle the inserts with care
– risk of cutting yourself.
Switch off the product, pull
out the plug and wait until all
moving parts have complete-
ly stopped before changing,
fitting or removing inserts.
Only touch the plastic parts
when handling inserts.
• Keep this product out of the
reach of children. Keep the
product under careful
supervision when it is used
near children.
• Do not use the product if it is
damaged.
IMPORTANT:
• The product may contain
residue from the
manufacturing. Clean the
product well before using
for the first time.
• Always clean the product
after use to prevent the
growth of bacteria.
ELECTRICAL SAFETY AND FIRE RISK
• Do not use the product in
explosive environments, for
example in the vicinity of
flammable liquids, gas or dust.
Summary of Contents for 008375
Page 3: ...2 3 4 1 11 1 2 3 4 5 6 7 8 9 10 ...
Page 4: ...5 6 7 8 9 10 ...
