29
2022_001
6
Press the + and - buttons for temperature to adjust
the required cooking temperature. The cooking
temperature range is 65–200°C and it is adjusted in
steps of 2.7°C. For cooking temperature guidance,
refer to “8 Cooking time and cooking temperature
guide” on page 30.
7
Press the + and - buttons for time to adjust the
required cooking time. The cooking time range is
1–90 minutes.
8
Press the rotisserie function button.
9
Press the ON/OFF button to start the cooking. The
display shows the cooking temperature and the
cooking time alternately. The product automatically
stops when the timer has reached 0 but it can also be
stopped manually. To stop the product manually,
press the ON/OFF button.
Note!
The fan in the product will continue to operate for an-
other 20 seconds to cool down the product. The fan symbol
flashes when the fan is in operation.
Warning!
Risk of burn injury. There can be hot air
and steam when you open the hatch. Be careful when you
open the hatch.
4
Maintenance
4.1 To clean the product
●
Clean the product after each use.
Warning!
Let the product become cool before you
clean it.
Warning!
Risk of electrical shock. Do not use a
dishwasher to clean the product. Only the accessories can
be cleaned in a dishwasher.
Caution!
Do not use abrasive utensils or corrosive de-
tergents when you clean the product. Abrasive utensils and
corrosive detergents can cause damage to the non-stick
coating on the hotplates.
Caution!
Do not rinse the product with water. The
electrical components in the product can become damaged.
●
Clean all surfaces with a damp cloth and a mild
detergent. Let the product become dry.
●
Remove encrusted scraps of food with dish brush.
●
Accessories such as the frying basket, oven racks and
splash guard can be cleaned in a dishwasher.
●
Soak accessories in hot water and washing-up liquid to
remove encrusted scraps.
●
Remove the glass in the hatch and clean it. Install the
glass after you have cleaned it. Refer to “4.2 To remove
and install the glass in the hatch” on page 29.
●
Clean the air intakes and air outlets with a vacuum
cleaner.
4.2 To remove and install the glass in
the hatch
Warning!
Let the product become cool before you do
maintenance on it.
1
Open the hatch.
2
Push in the button in the bottom of the hatch to push
up the glass.
3
Carefully pull up the glass from the top of the hatch.
4
Install the glass in the opposite sequence.
5
Storage
5.1 To put the product in storage
Warning!
Let the product become cool before you put
the product in storage.
Caution!
Do not wind the power cord around the
product.
1
Disconnect the power plug from the power outlet.
2
Make sure that all parts are dry.
3
Put the product in a clean and dry place.
Caution!
Make sure that there is no pressure on the
power cord.
6
Disposal
6.1 To discard of the product
Make sure that you follow local regulations when you
discard the product. Do not burn the product.
