EN
30
retailer if the vacuum cleaner still does
not work properly.
CHARGING THE BATTERY
1. Plug the charger into a power point.
2. Connect the charger cable to the vacuum
cleaner.
3. An audio prompt is given and green status
light starts flashing to show that the
battery is charging.
4. When the battery is fully charged the
green light stays on.
5. Pull out the charger cable from the
vacuum cleaner and unplug the charger
from the power point.
NOTE:
Charge the battery if the vacuum cleaner
stops and the green status light starts
flashing.
Replacing the battery
1. Open the battery cover and remove the
battery.
2. Press the catch with your left hand and
pull out the battery with your right.
3. Insert a new battery by pressing the lock
tabs and pressing the right-hand part to
the left so that the battery clicks in place.
4. Replace the battery cover. Align the
battery cover tabs to the square holes.
The battery cover is correctly fitted when
the cover is in line with the screw hole.
Tighten the screw.
MAINTENANCE
MAINTENANCE AND CLEANING
• Switch off the robotic vacuum cleaner, pull
out the plug, and wait until it has cooled
before cleaning.
• Do not use solvents, or strong or abrasive
detergent.
• Do not attempt to clean the inside of the
vacuum cleaner.
• Do not attempt to dismantle or repair the
vacuum cleaner. Replace the vacuum
cleaner if it is not working properly.
• Never immerse the vacuum cleaner in
water or any other liquid.
• Clean the outside of the vacuum cleaner
with a damp cloth. Wipe thoroughly dry.
• Clean the ventilation openings with a soft
brush.
• Clean the metal parts with a dry cloth.
• Clean the plastic parts with a dry cloth. Do
not use strong or corrosive detergent or oil.
• Store the vacuum cleaner in a dry and
cool place.
MIDDLE BRUSH
To clean the middle brush holder, press the
middle brush holder and take out the brush
wheel. Take out and clean the roller bearing
and fit the brush wheel.
DUST CONTAINER
Switch off the robotic vacuum cleaner before
emptying the dust container. Hold the vacuum
cleaner over a waste paper basket, or the
equivalent. Press the lock button for the dust
container to open the lid and empty the dust.
Close the dust container.
