42
2022_001
13
Carefully remove the blender lid from the blender
container and pour the food mixture into an
applicable container.
14
Clean the base unit and the accessories. Refer to “4.1
To clean the base unit” on page 42 and “4.2 To
clean the accessories” on page 42.
3.8 To use the grinder accessory
Use the grinder accessory to grind dry ingredients, for
example coffee beans.
1
Put the product on a level and stable surface.
2
Install the grinder drive unit (A) on the grinder
accessory (B). Turn the grinder drive unit clockwise to
tighten it. (Figure 8)
3
Put the required ingredients in the grinder accessory.
Caution!
Make sure that the amount of ingredients
does not exceed the “MAX” marking on the grinder accesso-
ry. The grinder accessory can grind 50 g of
ingredients at a time.
4
Put the grinder accessory on the base unit (C).
5
Align the arrow on the grinder accessory with the
arrow on the base unit and turn the grinder
accessory clockwise until it is locked in position.
Note!
The product will not start if the bowl is not locked in
position.
6
Connect the power plug to an earthed power outlet.
7
Turn the control knob to the required speed or use
the pulse function until the required consistency is
obtained. Refer to “3.2 To use the control knob” on
page 37.
Caution!
Do not operate the product for more than 30
seconds at a time with the grinder accessory.
8
Turn the control knob to the off position “0”.
9
Disconnect the power plug from the power outlet.
10
Turn the grinder accessory counter-clockwise and
remove it from the base unit.
11
Hold the grinder accessory so that the grinder drive
unit is up and turn the grinder drive unit counter-
clockwise to remove it.
12
Remove the grinded ingredients from the grinder
accessory.
13
Clean the base unit and the accessories. Refer to “4.1
To clean the base unit” on page 42 and “4.2 To
clean the accessories” on page 42.
4
Maintenance
4.1 To clean the base unit
●
Clean the product after each use.
Warning!
Make sure that all moving parts have
stopped before you clean or do maintenance on the
product.
Warning!
Disconnect the product from the power out-
let before you clean or do maintenance on the product.
Warning!
Do not use a dishwasher to clean the base
unit. Risk of electrical shock.
Warning!
Do not immerse the base unit in water or
other liquid. Risk of electrical shock.
Caution!
Do not use abrasive utensils or corrosive
detergents when you clean the product. Abrasive utensils
and corrosive detergents can cause damage to the product.
Caution!
Do not rinse the base unit with water. The
electrical components in the product can become damaged.
●
Clean all surfaces with a damp cloth and a mild
detergent. Let the product become dry.
●
Make sure that the lock system on the base unit is clean
and not blocked.
4.2 To clean the accessories
Clean the accessories after each use. All accessories can be
cleaned in a dishwasher.
Caution!
Do not use temperatures higher than 70°C
when you clean the accessories.
