Menuett 007565, Operating Instructions Manual

Page: 18 / 19

EN
18
HOW TO USE
1. Place the kettle on a level, stable surface.
2. Lift the kettle off the base, press the
lock button to open the lid, fill with the
required amount of water and close the
lid. The kettle can also be filled through
the spout. Fill to at least the MIN marking,
but do not fill above the MAX marking
on the level indicator. If there is too little
water in the kettle it will switch off before
the water boils.
3. Put the kettle on the base.
4. Plug in the plug. Press the power
switch. The status light goes on and
the water starts to be boiled. When the
water has boiled the kettle switches off
automatically and the power switch
moves to the OFF position. The kettle can
be switched off at any time by pressing up
the power switch. Press down the power
switch to resume boiling.
5. Lift the kettle off the base and pour out
the water.
6. The kettle remains switched off until started
again using the power switch. The kettle
can be kept on the base when not in use.
NOTE:
• Do not overfill – risk of splashing. Never
fill the kettle over the MAX marking.
Check that the lid is closed before
plugging in the plug.
• Check that the power switch can move
freely and that the lid is properly closed.
The kettle will not switch off if the power
switch is blocked or the lid is open.
• Handle the kettle carefully and do not
open the lid when it contains hot water
– risk of scalding.
• Pull out the plug when the kettle is not
in use.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage xxxx V ~ Hz
Output xxxx W
Volume xxxx L
Weight xxx g
Height xxxx mm
Diameter xxxx mm
Cord length xxxx m
DESCRIPTION
1. Lid
2. Handle
3. Power switch
4. Level indicator
5. Base plate
6. Casing
7. Spout
FIG. 1
USE
BEFORE USE
Before using for the first time, or if the kettle
has not been used for a long time, fill the kettle
to the MAX marking and boil. Pour out the
water. Wipe the kettle with a damp cloth.
NOTE:
The kettle holds 1.0 l.