Menuett 005367, Operating Instructions Manual

Page: 32 / 32

EN
32
MAINTENANCE
CLEANING CASING
Use a soft, dry cloth to clean the casing. Do not
use liquid detergents or aerosols.
NOTE:
• Always pull out the plug before
maintenance and/or changing
accessories.
• Put the vacuum cleaner away after use,
so that there is no risk of tripping over it.
• Keep the openings free from dust and
hair, etc. to prevent them from blocking
the flow of air.
DUST BAG
When the indicator for a full dust bag turns red,
or the suction power is reduced, it is time to
empty or replace the dust bag.
1. Open the front cover by pressing the lock.
FIG. 24
2. Take out the bag holder and the full dust
bag.
FIG. 25
3. Put the emptied or a new dust bag in the
holder and push the holder into the slot in
the casing.
FIG. 26
NOTE:
The front cover will not close unless the dust
bag is correctly inserted.
INLET FILTER
Replacing the inlet filter
1. Release the clip and take out the inlet filter.
FIG. 27
2. Fit a new filter of the same type.
Cleaning the inlet filter
Wash the filter in warm water and replace when
it is completely dry.
Cleaning the outlet filter
1. Open the outlet grille and take out the
HEPA filter and frame.
FIG. 28
2. Wash the filter and replace when it is
completely dry.
NOTE:
Keep the filters clean for best results. Make
sure the filters are completely dry before
putting them back in the vacuum cleaner.