EN
11
3. Start the steam cleaner according to
the instructions.
4. Move the brush nozzle up and down and
side to side to remove stains from the
clothes.
Cleaning windows
1. Fit the window nozzle onto the textile
nozzle.
2. Start the steam cleaner according to
the instructions.
3. Point the nozzle at the window, and start
the steam cleaner according to
the instructions.
4. Move the nozzle up and down and side
to side to remove stains.
Cleaning floors
Floor nozzle
1. Lift up the short sides on the floor nozzle
and slip on or remove the microfibre cloth.
2. Push down the short sides.
FIG. 6
– The microfibre cloth can used on
the brush nozzle for cleaning hard
surfaces.
– To clean carpets, curtains and
sensitive textiles, set the lever on the
brush nozzle to the position where
the bristles are shortest.
3. Start the steam cleaner according to the
instructions.
4. Point the nozzle at the floor and press the
steam button to remove dirt and stains
from the floor and corners.
Angle or brush nozzle
1. Fit the angled nozzle or the round brush
nozzle on the extension nozzle.
2. Start the steam cleaner according to the
instructions.
STARTING
1. Plug the plug into a power point.
2. The steam cleaner is ready to use after
four minutes.
3. Push the start inhibitor forward and
carefully press the steam button and
check that steam comes out from the
nozzle.
– If steam comes from the nozzle
release, the steam button and fit the
required accessory.
4. Press the steam button to do the job.
Filling with water during use
1. Pull out the plug from the power point.
2. Press the steam button until steam no
longer comes out.
3. Slowly release the safety cap, but let it
remain in place until steam no longer
comes out.
4. Place the steam cleaner in a cool place for
about five minutes to cool. Now remove
the safety cap.
5. Use the funnel and measuring cup to fill
the reservoir with cold or warm water.
6. Replace the safety cap and tighten it
firmly.
FUNCTIONS
Disinfection and sterilisation
1. Fit the jet nozzle or the flexible nozzle on
the connector.
2. Point the nozzle at the surface to be
disinfected.
3. Start the steam cleaner according to the
instructions.
Cleaning textiles
1. Fit the textile nozzle on the connector and
slip on the cleaning cloth.
2. Point the nozzle at a hung garment.
Summary of Contents for 003-284
Page 3: ...1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ...
Page 4: ...2 ...
Page 5: ...3 4 5 6 ...
