EN
18
2. Start the coffee maker and allow the water
to run through without using any coffee.
3. Pour out the water.
4. Repeat several times.
5. Wash all detachable parts carefully in
warm water.
Brewing coffee
1. Open the lid and fill the water tank with
drinking water. Do not fill above the MAX
marking on the level indicator.
2. Place the filter funnel in the filter holder.
FIG. 2
3. Place a filter in the filter funnel.
4. Fill ground coffee in the filter. As a rule use
one level tablespoon of ground coffee per
cup, but this can be adjusted according to
personal taste.
5. Close the cover over the filter holder.
6. Put the pot on the hob.
7. Plug the plug in a wall socket.
8. Press the power switch. The status lamp
comes on and brewing starts.
9. The coffee maker has a function for taste
setting. For stronger coffee, press and
hold the power switch for 4 seconds to
start brewing. The status lamp flashes
until brewing is complete.
NOTE:
The coffee maker is equipped with a non-drip
feature and the pot can be removed at most
for up to 30 seconds during brewing without
coffee dripping from the filter. If the pot is not
replaced within 30 seconds the coffee will
overflow in the funnel.
10. Wait one minute after the water tank is
empty before removing the pot to make
sure all the coffee has run through the
filter.
Symbols
Safety class II.
Approved as per applicable
directives.
Recycle a discarded product
in accordance with applicable
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output 750 W
Safety class
II
Filter size
1x4
Volume
1.25 l
Cord length
0.7 m
DESCRIPTION
1. Level indicator
2. Power switch
3. Jug
4. Drip stopper
5. Filter holder
6. Lid
FIG. 1
USE
Before using for first time
Check that all the accessories are included and
that the coffee maker is undamaged.
1. Fill up with fresh water to the MAX mark.
Summary of Contents for 002-349
Page 3: ...1 2 1 2 3 4 5 6 ...