manualshive.com logo in svg

mensor CPG2300, Operating Instructions Manual, Page: 9 / 42

Share
Download
mensor CPG2300 Operating Instructions Manual Download Page 9

Operating Instructions CPG2300 Series 

9

 

Portable Digital Pressure Gauge

 

CPG2300 Series

3. Product Description

3.1 General Description
The CPG2300 Digital Pressure Gauge is a portable battery powered instrument that 

provides very high accuracy pressure measurements. This instrument utilizes very high 

stability silicon sensors that are electronically compensated for pressure linearity over the 

entire operating temperature range. The CPG2300 also has a standard RS-232 serial port 

that can be used for remote communications.
Different models are available including the Model 2310 (single channel) and the Model 

2320 (dual channel). These channels are referred to as Channel A and Channel B, and 

can operate independent of each other. Viewed from the front, Channel A is the sensor on 

the top left of the instrument and can be ordered with any available pressure range (see 

the Specifications section). Channel B is the sensor on the top right of the instrument and 

can be ordered with pressure ranges from 5 to 1000 psig (7.5 to 1000 psia).
Additionally, the CPG2300 can be equipped with optional current measurement from 4 to 

20 mA and a 24V dc loop power. See the Options section for more information.
3.2 Display
Several different display screens are presented while operating the CPG2300. Each 

screen is arranged into blocks of information, generally organized into columns and rows. 

These screens are each described in further detail in the Local Operation and Remote 

Operation sections.
3.3 Power Supply
The power adapter is utilized to provide power to operate the CPG2300 and also to re-

charge the internal batteries. It produces 12 Vdc @ 830 mA max.
3.4 Battery
The CPG2300 has an internal battery pack consisting of four ‘AA’ nickel-metal hydride bat-

teries. The battery pack is replaceable and can be ordered from Mensor.
In pressure measurement mode the CPG2300 will operate approximately 20 hours on a 

fully charged new battery. There is a battery level indicator on the display that indicates the 

battery charge level. The battery level indicator will blink when there is approximately one 

hour of battery left. The unit will automatically shut off when the battery reaches a prede-

termined level.

Summary of Contents for CPG2300











































Reviews:

No comments