Operating Instructions - CPC3050
59
High-Speed Pressure Controller
CPC3050
7 Remote Operation
Use the screens in Section 6.4.9 Remote Application to set the operating parameters for the instrument
command set, Ethernet, Serial (RS-232) and IEEE-488 (GPIB) information.
7.1 Command Set
Command Set button – Users’ can select which model remote protocol they would like to emulate for
simulation and testing purposes. Selections may include the standard command sets or the optional
command sets selected in the Technical Assistance menu (Section 11) :
Standard:
• Mensor (default)
• SCPI WIKA (The SCPI WIKA mode emulates the WIKA command set in SCPI format.)
• DPI 5XX
• SCPI GE (The SCPI GE mode emulates the GE PACE command set in SCPI format.)
7.2 IEEE-488
IEEE-488 address button – Allows the user to set the GPIB address by inputting a numeric value utilizing
the touch screen.
7.2.1 IEEE-488.2 Commands
Command or Query
Response / Function
*IDN?
Returns identification string
*RST
Resets to default configuration
7.3 Ethernet
The Ethernet function allows the user to set the following by inputting a numeric value in each separate
field:
• IP
• Netmask
• Gateway
• Port
• DHCP settings
Set the Ethernet communication parameters as described in Section 6.4.9.