85-03-01108
FV46
Page
45
PF2 Ignition System Diagram
Note: Connect wires in junction box located on the left
side of this appliance to house power using supplied wire
nuts.
Note: On Décor models, the Split Flow circuit is
not installed nor used.
Replacement wires must have the same type and size of
insulation as the original.
This appliance must be electrically connected and
grounded in accordance with local codes or, in the absence
of local codes, with the current NFPA 70- National Electric
Code or CSA C22.1- Canadian Electrical Code.
Label all wires prior to disconnection when servicing
control. Wiring Errors can cause improper and dangerous
operation. Verify proper operation after servicing.
Summary of Contents for FV46
Page 2: ...85 03 01108 FV46 P a g e 2 HOMEOWNER NOTES...
Page 16: ...85 03 01108 C FV46 Page 16 Figure 3 9 Figure 3 8...
Page 95: ......
