Mendota DXV42 TIMBERFIRE, Installation & Operating Instructions Manual

Page: 5 / 44

MENDOTA DXV-42 GAS DIRECT VENT FIREPLACE
SPECIFICATIONS & CLEARANCES
5-1/2
15-1/2 31-3/4
63-1/2
45
12"
90°L
6" OR 7"
CAUTION: For L.P. & High Altitude (above 4,000 ft. but below
7,500 feet) 45
º
elbows must be used in place of 90
º
elbows. (SEE PG. 13). This requires 20" minimum to cen-
ter of opening for the horizontal pipe to exit the wall. CAUTION: If 90
º
elbows must be used with LPG, a
3-foot vertical starter section must be used directly off the top of the fireplace.
FOR INSTALLATION AT
ALTITUDES ABOVE 7,500 FEET, FIRST CALL MENDOTA TECHNICAL HOTLINE FOR
FURTHER INFORMATION ON THE STRICT REQUIREMENTS FOR INSTALLATIONS AT
THESE ALTITUDES.
FIGURE 1: Specifications & Clear-
ances
4