17
MENDOTA DXV-35 GAS DIRECT VENT FIREPLACE
SPECIFICATIONS & CLEARANCES
WARNING:
Do not cover the 2” faceplate border of the unit with combustible materials.
Figure 4: Specifications & Clearances
NOTE: For L.P. & High Altitude (above 4,000 ft. but below 7500 ft.), 45
º
elbows must be used in place of 90
º
elbows.
For Installation At Altitudes Above 7,500 Feet, First Call Mendota Technical Hotline For Further Information On The Strict
Requirements For Installations At These Altitudes.
CAUTION: If 90
º
elbows must be used with LP or at high altitudes, a 2-foot vertical starter section must be used
directly off the top of the fireplace.
