25
GLASS FRAME ASSEMBLY REPAIR AND REPLACEMENT
TO REPLACE DAMAGED GLASS
1. Using a 1/8” drill bit, drill through 3 rivets on each side of glass frame.
2. Remove glass retainer brackets and the damaged glass and gasket material. Clean the inner surface of the glass
frame.
3. Assemble new gasket on glass edge starting with the bottom left corner. The adhesive on the gasket should
make contact with the glass surface. Use tracer lines in gasket to determine where the glass should sit on the
gasket surface.
4. Place glass and gasket assembly in glass frame. Carefully attach glass retainer brackets to sides of glass frame
using new 1/8” Aluminum rivets.
The glass frame assembly and its individual components are available through Johnson Gas Appliance Company. Contact
your dealer for more detailed ordering information.
GLASS FRAME ASSEMBLY REPLACEMENT PARTS LIST
ITEM
PART NUMBER
DESCRIPTION
1
HA-
30
-00411
FRAME, WELDMENT, GLASS,
DXV35 DT 3
2
65-02-00103
GASKET, TADPOLE,
3/8”BULB, 3/4” TAIL
3
65-06-00463
GLASS, CERAMIC, DXV35
DT3
WARNING
Do not operate this appliance
with the glass removed, cracked
or broken. Glass should be re-
placed by a licensed or qualified
person.
WARNING
Use only authorized parts and
materials obtained from Johnson
Gas Appliance Company when
replacing defective or damaged
glass.
DO NOT
substitute other manufac-
turer's materials or components.
DO NOT
operate unit with cracked,
broken or missing glass.
DO NOT
abuse the glass door by
striking the glass, slamming the
door shut, etc
GLASS
TRACER LINES
IN GASKET
GLASS SHALL SIT BETWEEN
TRACER LINES IN GASKET
ROTATE GASKET UP
SO ADHESIVE MAKES
CONTACT WITH GLASS
SURFACE
ADHESIVE
GASKET
G
AS
KE
T
IN
F
LA
T
F
ORM
Summary of Contents for DT3-PF2-LX
Page 6: ...5...
Page 37: ...COMPLETED LOG SET ASSEMBLY...
Page 59: ...58 RATING LABEL REPRESENTATION DXV35 DT3...
Page 60: ...59 THIS PAGE LEFT BLANK INTENTIONALLY...
