Figure 1: Menda
®
HEPA Vac Kit
Description
The Menda HEPA Vac is a compact, high
performance, field service vacuum. This model has
been specifically designed with ease of portability in
mind. The powerful 600-watt motor can handle almost
any job. It is for those technicians who require a small,
lightweight vacuum for in use in and around sensitive
electronic equipment such as copy and fax machines,
telecom equipment, computers and printers. The
standard 99.97% efficient @ .3 micron HEPA filter
cartridge is ideal for fumes, atmospheric dust, lead,
glass, pollens, soot, drywall dust, and all color toner.
The filter is fully contained for safe, easy disposal.
The HEPA Vac is safe for ESD susceptible
electronics. The electronic line filter prevents EMI/RFI
noise, and the utensils are static dissipative. The
internal ground-wire in the flex-hose and enclosure
virtually eliminate static charge generation from
utensils.
Note:
The Menda
®
HEPA Vac is designed for
commercial use only. Keep the body of the HEPA Vac
12” (30cm) away from all ESD sensitive items.
Inspection
Remove the HEPA Vac from the shipping carton and
inspect for exterior damage.
TB-4003
July 2007 Page 1 of 2
HEPA Vac Commercial Vacuum
Operation and Maintenance
TECHNICAL BULLETIN TB-4003
Items included with model 35852/35844
• 1 99.97% @ .3 Micron HEPA Filter Cartridge
• 1 6' Flex-Hose (Toner Proof and Static Dissipative)
• 1 12" Goose Neck Attachment
• 1 Crevice Attachment
• 1 Crevice Attachment Brush
• 1 Detachable Power Cord (110V Only)
Optional Accessories
• 35855 Replacement 99.97% @ .3 Micron HEPA Filter
Cartridge
• 35856 Carrying Case
• 35857/35845 HEPA Vac Kit (includes HEPA Vac,
carrying case, micro tool kit, and spare filter)
Operation
Attach the flex-hose securely to the front of the vacuum.
Figure 2: Attaching flex-hose
Select the proper attachment. Insert the attachment to
the other end of the hose. Insert the female end of the
power cord into the AC receptacle at the rear of the
vacuum. Plug the power cord into an electrical outlet
that is properly grounded in accordance with all local
codes and ordinances. The power switch is located at
the top of the vacuum.
Filter Change-Out Instructions
Unplug the HEPA Vac from the electrical power. Remove
the flex-hose. Sit the vacuum upright, resting the back of
the unit with the inlet door facing you. With thumb and
forefinger, pull out the curved side tabs of the inlet door
until they are free from the latching mechanism on the
body of the vacuum. Then pull the door toward you,
being careful not to damage the ground wire (door may
hang by ground wire while the new filter is being
inserted).
3651 Walnut Avenue, Chino, CA 91710
Phone: (909) 627-2453 • Fax (951) 755-8848 • Web Site: MendaPump.com
Made in America
© 2007 DESCO INDUSTRIES INC.
Employee Owned
