MEN PX1N, User Manual

Page: 12 / 17

Getting Started
20PX01N00 E1 2015-09-09


Page 12
1 Getting Started
This chapter provides an overview of the board and some initial installation instructions.
1.1 Map of the Board
Figure 1. Map of the board – top view
1.2 Integrating the Board into a System
You can use the following check list when installing the card in a system for the first time
and with minimum configuration. The installation of the PX1N depends on the carrier
board. Please refer to your carrier board’s user manual before installing the PX1N.
»
Power down the system and remove the PCI Express Mini Card carrier board.
»
Install the PX1N on the PCI Express Mini Card slot of the carrier board as described
in the carrier board’s user manual.
»
Insert the carrier board into the system again
»
Power up the system.
Figure 2. Installing the PCI Express Mini Card (example only)
Also see Figure 2, Installing the PCI Express Mini Card (example only) .
U.FL antenna
connector
1
PCI Express Mini
Card connector
Serial No.
Input
connector