Getting Started
Page 23
Example of a command line interface:
2.5
Configuring Basic Switch Settings
For configuration, the powered on device must have a functional computer connection
running a terminal emulator such as TeraTerm or PuTTY on Windows, or GtkTerm or
Minicom on Linux.
This chapter describes the base tasks to work with the CLI on the device.
Username:
admin
Password:
***
#
#
?
alarm alarm
clear Clear/Reset functions
configure Enter configuration mode
copy Copy from source to destination
delete Delete one file in flash: file system
dir Directory of all files in flash: file system
disable Turn off privileged commands
do To run exec commands in the configuration mode
dot1x IEEE Standard for port-based Network Access Control
enable Turn on privileged commands
erps Ethernet Ring Protection Switching
exit Exit from EXEC mode
firmware Firmware upgrade/swap
help Description of the interactive help system
ip IPv4 commands
ipv6 IPv6 configuration commands
link-oam Link OAM configuration
logout Exit from EXEC mode
more Display file
no Delete trace hunt string/Negate a command or set its defaults
ping Send ICMP echo messages
platform Platform configuration
ptp Misc non persistent 1588 settings.
reload Reload system.
send Send a message to other tty lines
show show
terminal Set terminal line parameters
traceroute Send IP Traceroute messages
veriphy VeriPHY keyword
#
For more detailed instructions and additional information, please refer to
the
