BIOS
MEN Mikro Elektronik GmbH
61
20G020-00 E5 – 2014-01-21
IDE Configuration — Sub-menu
IDE Controller [Enabled]
HDC Configure as [AHCI]
AHCI/RAID SALP [Enabled]
SGPIO Interface [On]
SATA Port 0 - HotPlug [Disabled]
- Spin Up [Disabled]
SATA Port 1 - HotPlug [Disabled]
- Spin Up [Disabled]
SATA Port 2 - HotPlug [Disabled]
- Spin Up [Disabled]
SATA Port 3 - HotPlug [Disabled]
- Spin Up [Disabled]
SATA Port 4 - HotPlug [Disabled]
- Spin Up [Disabled]
SATA Port 5 - HotPlug [Disabled]
- Spin Up [Disabled]
>Serial ATA Port 0 [Not Installed]
>Serial ATA Port 1 [Not Installed]
>Serial ATA Port 2 [Not Installed]
>Serial ATA Port 3 [Not Installed]
>Serial ATA Port 4 [Not Installed]
>Serial ATA Port 5 [Not Installed]
IDE Controller
Description
Enables or disables the IDE controllers.
Options
Enabled
Disabled
HDC Configure as
Description
Set hard disk controller configure type.
Options
IDE
RAID
AHCI
AHCI/RAID SALP
Description
Enable/Disable AHCI/RAID Support Aggressive Link Power Man-
agement (SALP) in AHCI Host Capability Register Bit 26.
Options
Enabled
Disabled
SGPIO Interface
Description
Switch for starting (on) or stopping (off) the SGPIO interface
Options
On
Off
SATA Port 0/1/2/3/4/5 Hot Plug
Description
Enable/disable Hot Plug
Options
Enabled
Disabled
