MEMPHIS DAY BED c/w TRUNDLE ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Batch No. 221602
Page
2
of
8
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to support a maximum load of 100Kg spread evenly over the
length of the bed. Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and
a clean, dry area for assembly.
Unwrap all packaging materials and place each component on top of the carton box or on
a clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
When finished, check all screws or bolts are tightened and inspect regularly.
Tools are not included unless specified in the parts list.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs/base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide..
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
climb
or stand on the product.
sit on the product unless a mattress is in place.
