background image

 

VG0970_D1     9/11/12 

 

   

Automa c

 

Start

 

Up

 

 

1.

 

To

 

Start

 

Press the On/O

       touch pad.  

The

 

start

 

up

 

mode

 

will

 

begin;

 

a

 

LED

 

light

 

will

 

blink

 

to

 

indicate

 

startup

 

mode.

  

The

 

startup

 

mode

 

is

 

med

 

to

 

last

 

30

 

minutes

 

or

 

un l

 

the

 

appliance

 

reaches

 

a

 

temperature

 

above

  

170°F.

  

A er

 

it

 

reaches

 

this

 

“Warm”

 

state,

 

the

 

blinking

 

LED

 

light

 

will

 

become

 

solid.

 

 

2.

 

Set

 

the

 

TEMP

 

DISPLAY

 

Arrows

 

to

 

the

 

desired

 

temperature

 

(Set

 

light

 

will

 

illuminate)

 

If the grill is set to a 

temperature less than 300° it will run in Smoke Mode.  If set to 300° or above it will run in Cook Mode.  The 
meat probe can be set from 68° to 250°.  For more informa on on the use of the meat probe, consult page 8. 

 

3.

 

Set

 

TEMP

 

DISPLAY

 

to

 

Actual.

 

(Actual

 

light

 

will

 

illuminate)

 

Temperature now displayed  

    will be actual temperature in the cooking area

. Note: Actual temperature will 

fl

uctuate up or  

     down. This is normal and represents the normal 

fl

uctua on of any oven.  

 

Note:

    

1: If hopper was just 

fi

lled; hold Pellet Prime bu on in un l you hear pellets falling onto the burn pot and  

release.  Then restart the grill by pressing the I/O bu on.  This will allow the grill run its complete start

up sequence.  

 

 

2: Your Grill will smoke for a few minutes while the pellets are ligh ng and coming to full burn.

 

 

3: If the 

fi

re does not start within 30 minutes, the grill will then automa cally shut o

. If this happens, 

some unburned pellets will have built up in the burn pot. Before restar ng the 

fi

re, clean the excess 

pellets out of the burn pot and repeat the above steps.

 

 

Opera ng

 

Instruc ons:

 

Memphis

 

Wood

 

Fired

 

Grill

 

Opera ng

 

Instruc ons:

 

Memphis

 

Wood

 

Fired

 

Grill

 

 

 

Fahrenheit

 

VS.

 

Celsius:

 

Conver ng

 

Your

 

Grill’s

 

Temperature

 

Units

 

 

  Your Memphis grill is capable of working in both Metric and English 

units.  To switch between Fahrenheit and Celsius on the ITC, simply 
press and hold the UP and DOWN arrow keys at the same  me while 
the grill is on. 

Summary of Contents for Advantage













































Reviews: