background image

Fig. 1 

Fig. 3 

Fig. 6 

1. Place lower slot into lower bushing. 
2. Rotate top slot into place. 
3. Secure locking Mechanism. 
4. Loosen Allen Bolt to adjust angle, 
     then re-tighten Allen Bolt. 

CORRECT 

Fully engaged 

Locking mechanism 

NOT CORRECT 

Latch assembly 

Fig. 2 

Space Approx. 
2" apart. 

WARNING:  

Mounting clamps 
backwards will cause 
damage to your tank.  

Throttle side, 
front of bike 

INCORRECT  

CORRECT  

Fig. 4 

Start with Fork Clamp Bushing 
adjusted to rear of  slot. Then ad-
just as needed and check for 
clearance. 

(See above "Read and 

Follow Directions Warning.") 

Bushing Assembly 

Fig. 5 

Loosen Allen 
Bolt to adjust 
angle, then  
re-tighten  
Allen Bolt. 

Fig. 7 

Third bolt 

First Bolt 

6. Adjust the height, angle and alignment of the windshield 
and tighten 

ALL 

bolts. (Fig. 7) 

 

Note: This is a detachable windshield, ALWAYS make 
sure the Locking Mechanism is Fully Engaged after in-
stalling the windshield!  (Fig 6) 

2. Mounting Instructions, continued

 

Reviews: