LOCATION OF CONTROLS
CONNECTING THE LOUDSPEAKERS
Connect the cables of the two loudspeakers to the corresponding input
(R)
for the
right speaker and input
(L)
for the left speaker, located at the back of the unit.
Warning:
z
Connect the loudspeakers before powering the unit:
z
The unit may not work properly or get damaged if you use speakers
different than the ones supplied with the unit
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC
outlet.
ATTENTION
1.
Do not plug or unplug the power cable while you have wet hands;
2.
When planning not to use this unit for a long time, disconnect the power
cable from the wall outlet;
3.
When disconnecting the power cord from the wall outlet, do not pull on the
cord in order to avoid shock risks caused by damaged cable.
1. Speakers
16. Minute Set Button
2. Function Switch
17. Repeat Button
3.
Power
Switch
18.
Play/Pause
Button
4. Stereo Headphones Jack
19. FM Stereo Indicator
5. Volume Control Knob
20. Stop Button
6. Skip / Backward Search Button
21. CD Door
7. Remote Sensor
22. Tuning Knob
8. Skip / Forward Search Button
23. CD Door Open Button
9. Power Indicator
24. CD Door Close
10. Program Button
25. Band Switch
11. ON / OFF Alarm Switch
26. AC Socket
12. Display
(CD, Time, AM/FM Station, Alarm)
27. Left Speaker Jack
13. Alarm Set Button
28. Right Speaker Jack
14. Time Set Button
29. FM Wire Antenna
15. Hour Set Button
SET THE CORRECT TIME
Before starting to set the time, make sure that the Function Switch is not on Radio
position.
Press and hold the time button as well as the Hour and Minute buttons simultaneously,
in order to set the time. Release all buttons when reaching the correct time.
RADIO OPERATION
1.
Set the Function Selector to Radio position;
2.
Set the band selector to AM/FM position;
3.
Adjust the TUNING control to tune in a radio station.
SET THE ALARM TIME
Before starting to set the alarm time, make sure that the Function Switch is not on
Radio position.
Press and hold simultaneously the Alarm button as well as the Hour and Minute
buttons, to adjust the alarm time. Release all buttons when reaching the desired alarm
time and the display will go back to regular time.
- 3 -
- 4 -