DISASSEMBLY INSTRUCTIONS
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
1.
2.
3.
4.
Remove the 2 screws (1).
Disconnect the following connectors:
(CP354, CP401 and CP502).
Unlock the support (2).
Remove the TV/VCR Block in the direction of arrow.
Fig. 1-3
UP TO
RELEASE
TV/VCR Block
Front Cabinet
(2)
(1)
(1)
1-4: DECK CHASSIS AND SYSCON PCB
(Refer to Fig. 1-4)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Remove the screw (1).
Remove the FE Head.
Remove the 2 screws (2).
Remove the 3 screws (3).
Remove the screw (4).
Remove the Deck Shield Plate in direction of arrow (A).
Remove the 2 screws (5).
Disconnect the following connectors:
(CP1001, CP4001, CP4002 and CP4003).
Remove the Deck Chassis in the direction of arrow (B).
Remove the screw (6).
Remove the Syscon PCB in the direction of arrow (C).
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
B1-1
CRT PCB
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
Remove the 7 screws (1).
Remove the AC cord from the AC cord hook (2).
Remove the Back Cabinet in the direction of arrow.
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
2.
3.
Fig. 1-2
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP801 and CP851B).
Remove the CRT PCB in the direction of arrow.
Fig. 1-1
Front Cabinet
Back Cabinet
(1)
(1)
(1)
(2)
(1)
Front Cabinet
(1)
(1)
(1)
