background image

8

When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of

the glass. This is called moisture condensation.

When you move this VCR from a cold to a warm place.

After heating a cold room or under extremely humid conditions.

Plug the power cord into an AC outlet, press the POWER button to turn on and leave the unit at room

temperature until moisture condensation disappears.

Depending on the surrounding conditions, this may take two or three hours.

MOISTURE CONDENSATION

DO NOT OPERATE THIS VCR FOR AT LEAST TWO OR THREE HOURS WHEN MOISTURE IN THE AIR
CONDENSES ON THE VCR.

PRECAUTIONS

Video Tape

Head Drum

If you cause a static discharge when touching the
VCR, and the VCR fails to function, simply unplug the
unit from the wall outlet, wait a few minutes and plug
it back in. The VCR should return to normal operation.

104

°

F

(40

°

C)

Do not place the VCR on or near appliances which
may cause electromagnetic interference, e.g. TV,
speakers, etc. Doing so may cause erratic operation
of the VCR including picture and/or sound distortion
or noise.

Avoid extreme heat.

(5

°

C)

41

°

F

Avoid extreme cold.

WHAT IS MOISTURE CONDENSATION?

MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;

WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,


 4C73201A E (Cover-09)

16/7/99, 10:30 PM

8

Summary of Contents for MVR1026A










Reviews: