During Repeat 3 mode,
display shows
During Mix mode,
display shows
FOLDER UP
For MP3/WMA playback, when the unit is at STOP mode, skip up to next folder/album
at increasing order & it will show the folder/album number; press PLAY/PAUSE button to
start the playback of the selected folder/album. When the unit is at MP3/WMA PLAYBACK
mode, skip up to next folder/album at increasing order & the folder/album number will flash
for 3 seconds; then it will start playback of the selected folder/album.
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW,
playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance,
writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
FOR MP3 / WMA PLAYBACK
Mode sequence REPEAT >> REPEAT FOLDER >> REPEAT ALL >> MIX >> CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
MP3 / WMA display
GB 5
MP3 / WMA display
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played
in the desired order. Up to 20 tracks can be programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Press the " PROGRAM " button again to memorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
" " , " PROG " & track number are shown on the
CD display.
6. Press the
"
STOP
"
button once to stop programmed
playback.
7. Press the
"
PLAY/PAUSE
"
button to resume
programmed playback.
8. Open the CD door, turn off the CD player or press the
"
STOP
"
button twice to clear the programmed
memory.
Note : Programming can only be made when the player
is in stop mode.
FOR MP3 / WMA PLAYBACK
Programmed playback enables folders/albums or tracks on a
disc to be played in the desired order. Up to 20 folders/albums
or tracks can be programmed.
1. Press the
"
PROGRAM
"
button.
2. For
"
Folder programming
"
, press the
"
FOLDER UP
"
buttons to select the desired folder number.
3. For ‘Track programming’, press the
"
NEXT
"
and
"
BACK
"
buttons to select the desired track number.
Then, press
"
PROGRAM
"
button again to memorize
the selected track.
4. Repeat steps 2 and 3 until all desired folders or
tracks are programmed.
5. Press the
"
PLAY/PAUSE
"
button to start.
"
"
,
"
PROG
"
and
"
MP3 / WMA "
& track
number
are shown on the CD display.
6. Press the
"
STOP
"
button once to stop programmed
playback.
7. Press the
"
PLAY/PAUSE
"
button to resume
programmed playback.
8. Open the CD door, turn off the CD player or press the
"
STOP
"
button twice to clear the programmed
memory.
Note : Programming can only be made when the player
is in stop mode.
MP3 / WMA display
" PROGRAM "
CD display
" PROGRAM "
PROGRAM
PROGRAM
