Two (2) “AA” size batteries can also be used
to provide a backup for the clock, timer
times, and the presets as follows:
1. Open the battery door on the bottom of
the unit by pushing in on the tab, then
removing the door.
2. Insert two (2) “AA” batteries as shown.
Alkaline batteries are recommended for
the longest playing time.
3. Place the battery door back on the compartment.
NOTE:
The batteries are used to back-up the clock, timer times, and
presets when the AC cord is disconnected or there is a power failure.
IMPORTANT!
See BATTERY PRECAUTIONS on the next page.
9
POWER SOURCE
INSERTING THE BATTERIES
AC CONNECTION
Unwind the AC cord and extend it to its full
length. Insert the AC plug into any
convenient 120V 60Hz household outlet.
Please note that this unit is equipped with a
polarized AC plug which has one blade wider
than the other. This is a safety feature to
reduce the likelihood of electric shock. This
polarized AC plug will only fit in a polarized
AC outlet. If you find that you cannot insert
this plug into your outlet, you may have an
obsolete non-polarized outlet. Please do not
try to defeat this safety feature by using a non-polarized adapter or by filing the wider
blade to make it fit into your outlet. If this plug does not fit into your outlet, you should
contact a qualified licensed electrician to replace your obsolete outlet.
IMPORTANT NOTE:
If there is a power failure or the AC cord is disconnected for a
short period of time, the clock will stop, but the time and radio presets will be saved.
When the power is resumed or the AC cord is connected again, the clock time will
continue running and the radio presets will have been saved. However, if the power
failure lasts or the AC cord is disconnected long enough for the battery to weaken
too much, the clock will be reset and you will need to set the clock and radio presets
again.
AC Plug
AC Outlet
All manuals and user guides at all-guides.com
