To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support
section at:
www.Memorex.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en:
www.Memorex.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.Memorex.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.Memorex.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]
Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specifications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output/headphone jack on an audio device.
2. Press
Source/LEDs
to switch to Aux in mode.
3. Use the controls on the connected device to select and play audio.
Bluetooth Wireless
Pairing & Playing Audio
1. Press the Source/LEDs button to select Bluetooth Mode.
2. When the speaker is ready to pair a voice prompt will sound. Using the
controls on your Bluetooth device, scan for and select ISB200 in your
Bluetooth settings to pair. Refer to the user’s manual for your specific
device for instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, a voice prompt will sound from the unit.
4. Use the controls on the connected device to select and begin playing
audio. Audio played through the connected Bluetooth device will now
be heard through the speaker. Use the controls on the speaker or the
connected device to play, pause, and adjust volume.
Note: After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you find it is unable to connect, press and hold the Play/Pause/
Pair button to pair manually and repeat the above steps.
USB Drive
1. Load a USB drive into the USB media drive
2. The speaker will automatically switch to USB mode.
3. Use the controls on the speaker to select and play and pause audio
from the connected USB drive.
FM Radio
1. To use the FM radio, press the
Source/LEDs
button to switch to FM
mode.
Auto Search and Saving Stations
2. To use the auto search function press the
Play/Pause/Party Plus
button while in FM mode.
3. The radio will auto search stations and save them.
4. To cycle through the saved stations press the
Next/Previous
buttons.
Using the Microphone
To use a microphone, plug a microphone into the Microphone Input and the
speaker will project your voice out loud. Use the Volume Wheel in order to
control the volume of the microphone.
Charging the Battery
1. To power the unit or charge the internal battery, connect the
DC Power
Input
on the speaker to a standard power outlet using an AC/DC power
adapter.
Party Plus Mode.
Party Plus Mode allows two identical “MSB200” speakers to pair together for
a stereo sound effect.
1. To enter Party Plus Mode, Power ON both speakers and set to
Bluetooth mode.
2. Press and hold the
button on one of the units until an audible
chime is heard. The speakers will attempt to pair to each other.
3. When the 2 speakers are paired together a voice will announce the
connection.
4. Connect Bluetooth device to speakers using the steps from the “Pairing
and Playing Audio” section above.
5. Use your device to select and play tracks. The audio will now be heard
through both speakers.